Flexible current clamp ： Internal diameter ：φ200mm Signal line length: 3 m

Scope of detection ： Power failure identification: the coil can detect the composite pulse width frequency signal with circuit resistance of 0 Ω ~ 30 kΩ; generally, the cable length can be over 20 km, mainly determined by the cable grounding resistance and cable resistance.

Live identification: the coil can detect the pulse signal with circuit resistance 0 Ω ~500 Ω; when the test circuit resistance is 500 Ω, the cable length can reach 0-10 km

capacity of resisting disturbance ： Highest 100A（50Hz，10dB level）

Signal sampling rate ： Adaptation for different frequency sampling rates，Max 819.2KHz

Armored damaged mode ： Yes

The results show the period ： About 2times/second

Auto shut off ： After 30 minutes of no operation and no input, the instrument will be shut down automatically to save power

When the battery level is too low, the instrument will be shut down

Firmware update ： Support, is updated via USB

USB ： USB Charging port

Working temperature and humidity ： -10℃～40℃；less than 80%Rh

Store temperature and humidity ： -10℃~50℃，≤95％RH, no condensation

Receiver quality ： Flexible current clamp 112g; Receiver 405g (with battery)

Withstand voltage ： AC2000V/rms(Before the front and rear ends of the enclosure)

Function ： Output composite pulse width frequency signal, signal coupling output, signal directly connected output, display output voltage, output current, circuit impedance, residual battery voltage, and dynamic indication of transmission state

Power supply ： Live identification model: 9.6V / 6Ah lithium battery, full power continuous operation for about 8 hours (3 levels output)

Output method ： Live identification model: automatic identification, caliper coupling during live identification; direct connection output during power identification

Power outage identification type: only power outage identification direct connection output

Frequency ： 6 Adjustable：640Hz、1.28KHz、2.56KHz、3.84KHz，6.50KHz，8.05KHz

Output interface ： Waterproof aviation socket

Output power ： Maximum 15W, 5 Levels adjustable, automatic real-time impedance matching

Output voltage ： The maximum peak value is about：110V

Armored damaged mode ： Yes

Transmitter clamp ： inner diameter：φ125mm wire length：3meter

Directed connection clamp ： Caliber：Max 24mm wire length：1meter

Transmitter clamp magnetically saturated ： 40A（50Hz）

Human-computer interaction ： Physical buttons, touch screen , gesture recognition

Auto shut off ： Yes, no operation, no output for 30 minutes of automatic shutdown, the time can be set

Automatic standby ： Yes, the default no operation for 5 minutes to automatically reduce the screen brightness to save power, the time can be set

External voltage detection ： Yes, up to 150V

Charging port ： Circular charging interface, DC mark

Fixed parts update ： Support, is updated via USB

Transmitter size ： 275mm×226mm×150mm

LCD size ： Length width 120mm×70mm； Display field 110mm×62mm

Working temperature ： -10℃～40℃

storage condition ： -20℃~50℃，≤95％RH, no condensation

Working temperature ： -10℃～40℃

Storage condition ： -20℃~50℃，≤95％RH, no condensation

Instrument quality ： Transmitter about 2.28kg; Transmitter clamp about 1.12kg; The direct connection test clip is about 170g, and the total mass is about 4.44kg

Withstand voltage ： AC 3700V/rms(Before the top surface and bottom surface of the instrument box)

Electromagnetic characteristics ： IEC61326(EMC)

Refer to safety regulations ： IEC61010-1(CAT Ⅲ 300V、CAT IV 150V、class of pollution 2)

Transmitter technical specification

Function ： Output composite pulse width frequency signal, signal coupling output, signal directly connected output, display output voltage, output current, circuit impedance, residual battery voltage, and dynamic indication of transmission state

Power supply ： Live identification model: 9.6V / 6Ah lithium battery, full power continuous operation for about 8 hours (3 levels output)

Output method ： Live identification model: automatic identification, caliper coupling during live identification; direct connection output during power identification

Power outage identification type: only power outage identification direct connection output

Frequency ： 6 Adjustable：640Hz、1.28KHz、2.56KHz、3.84KHz，6.50KHz，8.05KHz

Output interface ： Waterproof aviation socket

Output power ： Maximum 15W, 5 Levels adjustable, automatic real-time impedance matching

Output voltage ： The maximum peak value is about：110V

Armored damaged mode ： Yes

Transmitter clamp ： inner diameter：φ125mm wire length：3meter

Directed connection clamp ： Caliber：Max 24mm wire length：1meter

Transmitter clamp magnetically saturated ： 40A（50Hz）

Human-computer interaction ： Physical buttons, touch screen , gesture recognition

Auto shut off ： Yes, no operation, no output for 30 minutes of automatic shutdown, the time can be set

Automatic standby ： Yes, the default no operation for 5 minutes to automatically reduce the screen brightness to save power, the time can be set

External voltage detection ： Yes, up to 150V

Charging port ： Circular charging interface, DC mark

Fixed parts update ： Support, is updated via USB

Transmitter size ： 275mm×226mm×150mm

LCD size ： Length width 120mm×70mm； Display field 110mm×62mm

Working temperature ： -10℃～40℃

storage condition ： -20℃~50℃，≤95％RH, no condensation

Working temperature ： -10℃～40℃

Storage condition ： -20℃~50℃，≤95％RH, no condensation

Instrument quality ： Transmitter about 2.28kg; Transmitter clamp about 1.12kg; The direct connection test clip is about 170g, and the total mass is about 4.44kg

Withstand voltage ： AC 3700V/rms(Before the top surface and bottom surface of the instrument box)

Electromagnetic characteristics ： IEC61326(EMC)

Refer to safety regulations ： IEC61010-1(CAT Ⅲ 300V、CAT IV 150V、class of pollution 2)

Function ： Output composite pulse width frequency signal, signal coupling output, signal directly connected output, display output voltage, output current, circuit impedance, residual battery voltage, and dynamic indication of transmission state

Power supply ： Live identification model: 9.6V / 6Ah lithium battery, full power continuous operation for about 8 hours (3 levels output)

Output method ： Live identification model: automatic identification, caliper coupling during live identification; direct connection output during power identification

Power outage identification type: only power outage identification direct connection output

Frequency ： 6 Adjustable：640Hz、1.28KHz、2.56KHz、3.84KHz，6.50KHz，8.05KHz

Output interface ： Waterproof aviation socket

Output power ： Maximum 15W, 5 Levels adjustable, automatic real-time impedance matching

Output voltage ： The maximum peak value is about：110V

Armored damaged mode ： Yes

Transmitter clamp ： inner diameter：φ125mm wire length：3meter

Directed connection clamp ： Caliber：Max 24mm wire length：1meter

Transmitter clamp magnetically saturated ： 40A（50Hz）

Human-computer interaction ： Physical buttons, touch screen , gesture recognition

Auto shut off ： Yes, no operation, no output for 30 minutes of automatic shutdown, the time can be set

Automatic standby ： Yes, the default no operation for 5 minutes to automatically reduce the screen brightness to save power, the time can be set

External voltage detection ： Yes, up to 150V