{"product_id":"vtsyiqi-ultrasonic-hardness-tester-durometer-non-destructive-hardness-testing-with-astm-standard-force-9-8n-maximum-test-surface-roughness-ra-3-2μm-scale-hv-hrc-hra-hrb-hbw-for-thin-walled-workpiece","title":"VTSYIQI Ultrasonic Hardness Tester Durometer Non-Destructive Hardness Testing with ASTM Standard Force 9.8N Maximum Test Surface Roughness Ra\u003c3.2μm Scale HV HRC HRA HRB HBW for Thin-Walled Workpiece","description":"\u003cp\u003e\u003cb\u003e\u003cstrong\u003eAbout this item\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e◆Directly test Vickers hardness value of workpiece, and there is no need to convert like Leeb or Shore hardness tester. The conversion error is eliminated.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e◆High test speed -- output test results within seconds\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e◆Standard Vickers indentation, tiny indentation, little damage to the workpiece\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e◆The test results are related to the elastic constants of the workpiece. New workpiece needs to be calibrated according to the elastic constants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e◆Small volume, light weight and easy to carry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e◆Easy to test on assembly line.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e◆It can be used for testing on site and testing large workpiece and can be used to make hardness measurements on positions difficult to access, such as tooth flanks or roots of gears.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"a-row a-expander-container a-expander-inline-container\"\u003e\n\u003cdiv data-expanded=\"true\" class=\"a-expander-content a-expander-extend-content a-expander-content-expanded\"\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e◆Only measuring the hardness condition of the surface contacted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e◆The development of microcontroller technology makes it easy to calibrate workpiece with different elastic constants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"celwidget aplus-module launchpad-brand-description-left aplus-standard\" data-csa-c-id=\"ulvbvr-6l85al-8v3dbn-h1dy0a\" data-cel-widget=\"aplus-launchpad-brand-description-left\"\u003e\n\u003cdiv class=\"a-section launchpad-module launchpad-module-brand-description-left\"\u003e\n\u003cdiv class=\"a-section launchpad-text-left-justify\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"a-text-bold\"\u003eCharacteristics:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eDirectly test Vickers hardness value of workpiece, and there is no need to convert like Leeb or Shore hardness tester. The conversion error is eliminated.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eHigh test speed -- output test results within seconds\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eStandard Vickers indentation, tiny indentation, little damage to the workpiece\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003eThe test results are related to the elastic constants of the workpiece. New workpiece needs to be calibrated according to the elastic constants.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eSmall volume, light weight and easy to carry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eEasy to test on assembly line.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eIt can be used for testing on site and testing large workpiece and can be used to make hardness measurements on positions difficult to access, such as tooth flanks or roots of gears.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eOnly measuring the hardness condition of the surface contacted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eThe development of microcontroller technology makes it easy to calibrate workpiece with different elastic constants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"a-text-bold\"\u003eProbe Specification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003eProbe:10kgf manual probe\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003eTest force:98N\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eDiameter:22mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eLength:150mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eResonating rod diameter:2.4mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003eMaximum roughness of test surface:Ra\u0026lt;15μm\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003eMinimum workpiece weight:0.3kg\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003eMinimum workpiece thickness:2mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003eApplication:Small forgings, foundry materials, weld inspection, H--A--Z, low requirement for roughness\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"a-text-bold\"\u003eTechnical Specification：\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003eMain hardness scale: HV ;Convertible hardness scale: HRC, HRA, HRB, HBW\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eIn multi-points calibration mode, any hardness scales can be chosen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003eTesting range: HV50~1599, HRC20~68, HB85~650\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003eTest direction：Support 360° test, as long as the angle between the indenter and the surface doesn’t exceed 90° ± 3°.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eBattery: 3.6V, 3000mAh lithium battery\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eEndurance: 10 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003eTest data can be exported to computer terminal.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"celwidget aplus-module launchpad-brand-description-left aplus-standard\" data-csa-c-id=\"pd6kmr-1e71k-ckbcdc-5xd7xs\" data-cel-widget=\"aplus-launchpad-brand-description-left\"\u003e\n\u003cdiv class=\"a-section launchpad-module launchpad-module-brand-description-left\"\u003e\n\u003cdiv class=\"a-section launchpad-text-left-justify\"\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eNorms: GB\/T 34205-2017; DIN 50159-1-2008; ASTM-A1038-2005; JB\/T 9377-2010; JJF 1436-2013.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003eHigh accuracy----±4%HV, ±4%HB, ±1.5HR.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eTiny test indentation---- requires a high-power microscope to see.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eLittle damage to the workpiece.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eHigh test speed----output test results in 1s at the soonest.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eNew appearance design, innovative sculpt, convenient to hold and good craft.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eFull English display, menu-type operation, few keys, simple and convenient to operate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e3.5 inches large LCD screen with 320×480 color graphics dot matrix, beautiful font and graphics, rich information and clear display.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eDirectly display the current measured value, cumulative measured value, maximum value, minimum value, average value and conversion value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003e50 sets of data storage.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eSimple calibration----5 sets of one-block calibration data, 1 set of default calibration data and 5 sets of multi-blockss calibration data can be stored in the host.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eFor materials with different elastic constants, just an one-block calibration is required to adapt to the new material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eFor unknown material or material without conversion table, the hardness scale can be arbitrarily selected for multi-points calibration to eliminate the systematic error brought by the conversion table.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eEasy to test on assembly line.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eOperating Conditions:Temperature: -10℃~40℃;Humidity: ≤ 90%RH;No strong electromagnetic interference\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eHost size: 170mm*70mm*20mm;Probe size: Ǿ22mm*150mm;Weight: 650g\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003ePacking List:Host;Manual probe;Probe connection cable;5V ac power adapter;USB cable;Standard hardness workpiece;Equipment case;Operating manual;Certificate\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"a-text-bold\"\u003eApplication:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eHardness test of flange edge and gear root stamping parts, mold, thin plate, face-hardened gear tooth, gear groove and taper part\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eHardness test of axle and thin-wall pipes and vessels\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eHardness test of wheels and turbine rotors\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eHardness test of bit edge\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eHardness test of welding parts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eMeasure the depth of deep hole with certain aperture, concave and convex with large radians, and irregular plane\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eHardness test of most ferrous and nonferrous metals and their alloys in industrial production\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eHardness test of thin coatings \u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003eetc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan class=\"a-text-bold\"\u003ePlease note that the application scenarios are different according to different probes.\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"VTSYIQI","offers":[{"title":"Default Title","offer_id":47359885279453,"sku":"UH300-98N-PUXI-Lucky-1","price":2415.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/1749\/1165\/files\/24_97975dbb-6a6f-4ed4-b4fc-a2451caf6811.jpg?v=1770188066","url":"https:\/\/www.vtsyiqi.net\/products\/vtsyiqi-ultrasonic-hardness-tester-durometer-non-destructive-hardness-testing-with-astm-standard-force-9-8n-maximum-test-surface-roughness-ra-3-2%ce%bcm-scale-hv-hrc-hra-hrb-hbw-for-thin-walled-workpiece","provider":"VTSYIQI","version":"1.0","type":"link"}